EN 
ES
PT
SV
DE
TR
FR
Automatic Control Of Tungsten Cemented Carbide To Improve Quality Professional Custom Pressure Sintering Furnace (Sinter HIP)
Suitable for sintering all kinds of cemented carbide products. Dewaxing, sintering and densification of Tungsten carbide can be completed in a single cycle at relatively low pressure.
When pressurized at sintering temperature, any residual pore or defects within the products are maximally eliminated, therefore greatly improving product’s strength and other mechanical properties.
karatteristika
The furnace is automatically-controlled with following functions: leak-testing (positive & negative pressure), dewaxing, vacuum sintering, process gas sintering, pressure sintering in Ar, fast cooling etc.
Regola tal-Kodiċi GPSF ◇X◇-◇ MPa | Value of Pressur |
| Effective Working Length (cm) 60, 90, 120, 180 | |
| Effective Working Width (cm) 30, 40, 50, 55, 60 | |
| Gas Pressure Sintering Furnac |
Parametri Tekniċi
| mudell | Effettiva Zone(mm) | Effettiva volum (L) | Max.Temp.(℃) | Pressjoni (MPa) | aħħari Vacuum(Pa) | Kapaċità (kg) |
| GPSF30×60 | 300 × 280 600 × | 50 | 1550 | 6 (10) | 3 | 100 |
| GPSF30×90 | 300 × 280 900 × | 75 | 1550 | 6 (10) | 3 | 150 |
| GPSF40×120 | 400 × 400 1200 × | 192 | 1550 | 6 (10) | 3 | 400 |
| GPSF50×180 | 500 × 500 1800 × | 450 | 1550 | 6 | 3 | 900 |
Karatteristiċi
.High Temperature-uniformity
The distribution of heating power has been optimized to ensure temperature-uniformity during vacuum and HIP process.
High Temperature-uniformity ≤ ±5 ℃
Difference of Coercive Force < 0.4Kam
Difference of Cobalt Magnetic < 0.3%
.Overall Safety Protection
Safeguard devices are adopted and interlock is installed for safety
setup. The furnace system is safeguard properly in case of wrong
handling, over-pressure, over-temperature, water failure and power-cut.